User guide

DIGITMR USER’S MANUAL REV 3

3.5 Performing Timing Tests

3.5.1. Timing an OPEN Operation With No Insertion Resistors

To time an OPEN operation with no insertion resistors:

a. Start from the “START-UP” menu:

Press the [1] key (TIME BRKR) to start a test.

If a previous test shot is in the DigiTMR’s memory, the following screen will be

displayed:

1. SAVE SHOT

If you would like to save the previous shot in memory, press the [1] key (SAVE

SHOT). The following screen will be displayed:

Press the [ENTER] key. The following screen will be displayed:

Once the record is saved, the following screen will be displayed:

Press the

[ENTER] key and you will be returned to the “START-UP” menu. Re-

start at step a.

2. CONTINUE (NO SAVE)

SHOT SAVED

SAVING IN PROGRESS

PLEASE WAIT

SAVE SHOT # 0001

TEST: OPEN

DATE: 04/12/09

“ENTER” TO PROCEED

PREV SHOT NOT SAVED

1. SAVE SHOT

2. CONTINUE (NO SAVE)

1. TIME BRKR 04/17/09

2. GET RSLT 10:49:23

3. SET-UP

4. DIAGNOSTICS