User guide

DIGITMR USER’S MANUAL REV 3
29
f. The following screen will be displayed:
Using the numeric keypad, enter the delay time (in milliseconds) between the OPEN-
CLOSE operation, and then press the [ENTER] key.
g. The following screen will be displayed:
Using the numeric keypad, enter the delay time (in milliseconds) between the CLOSE-
OPEN operation, and then press the [ENTER] key.
h. The following screen will be displayed:
Press and hold down the [ARM] switch, and then press the [START] key. Continue to
hold down the [ARM] switch.
i. The following screen will be displayed during testing:
Continue to hold down the [ARM] switch until the test is completed.
j. Once the test is completed, you will be returned to the “START-UP” menu.
Test in Pro
g
ress
Hold “ARM” until
test complete.
(Up to 25 seconds)
OPEN-CLOSE-OPEN
Hold “ARM” switch,
then “START”.
“STOP” to ABORT
C-O Dela
y
in mS:
(10 – 350)
mSec
ENTER when done
O-C Dela
y
in mS:
(10 – 350)
mSec
ENTER when done