User guide

DIGITMR USER’S MANUAL REV 3

3.8 Working with Timing Shots

3.8.1. Saving Timing Shots in the DigiTMR’s EEPROM

After performing a test, the test shot can be saved in the DigiTMR’s EEPROM by using the steps

below:

a. Start from the “START-UP” menu:

Press the

[3] key (SET-UP).

b. The following screen will be displayed:

Press the

[3] key (SAVE / RESTORE).

c. The following screen will be displayed:

Press the [1] key (SAVE SHOT).

d. The following screen will be displayed:

Press the

[ENTER] key to confirm saving the shot.

e. The following screen will be displayed while the test shot is being saved:

SAVE IN PROGRESS

PLEASE WAIT

SAVE SHOT # 0001

TEST: OPEN

DATE: 04/21/09 08:32

“ENTER” TO PROCEED

1. SAVE SHOT

2. RESTORE SHOT

3. SHOT DIRECTORY

4. ERASE SHOT

1. ANALYSIS POINTS

2. MEASUREMENT UNITS

3. SAVE / RESTORE

4. NEXT PAGE

1. TIME BRKR 04/17/09

2. GET RSLT 10:49:23

3. SET-UP

4. DIAGNOSTICS