User guide

DIGITMR USER’S MANUAL REV 3

3.8.4. Erasing a Timing Shot From the DigiTMR’s EEPROM

Use the steps below to erase (delete) a specific timing shot from the DigiTMR’s EEPROM:

a. Start from the “START-UP” menu:

Press the [3] key (SET-UP).

b. The following screen will be displayed:

Press the [3] key (SAVE / RESTORE).

c. The following screen will be displayed:

Press the [4] key (ERASE SHOT).

d. The following screen will be displayed:

Press the

[1] key (ERASE SHOT).

e. The following screen will be displayed:

Using the numeric keypad, type the shot number that you would like to erase, and then

press the

[ENTER] key.

ENTER SHOT NUMBER

TO BE ERASED

0000

“ENTER” TO CONFIRM

1. ERASE SHOT

2. ERASE ALL SHOTS!

1. SAVE SHOT

2. RESTORE SHOT

3. SHOT DIRECTORY

4. ERASE SHOT

1. ANALYSIS POINTS

2. MEASUREMENT UNITS

3. SAVE / RESTORE

4. NEXT PAGE

1. TIME BRKR 04/17/09

2. GET RSLT 10:49:23

3. SET-UP

4. DIAGNOSTICS