User guide

DIGITMR USER’S MANUAL REV 3

3.8.5. Erasing All Timing Shots from the DigiTMR’s EEPROM

Use the steps below to erase (delete) all timing shots from the DigiTMR’s EEPROM:

a. Start from the “START-UP” menu:

Press the [3] key (SET-UP).

b. The following screen will be displayed:

Press the [3] key (SAVE / RESTORE).

c. The following screen will be displayed:

Press the [4] key (ERASE SHOT).

d. The following screen will be displayed:

Press the

[2] key (ERASE ALL SHOTS!).

e. The following screen will be displayed:

Press the [ENTER] key.

ALL SHOTS WILL BE

ERASED!

“ENTER” TO CONTINUE

1. ERASE SHOT

2. ERASE ALL SHOTS!

1. SAVE SHOT

2. RESTORE SHOT

3. SHOT DIRECTORY

4. ERASE SHOT

1. ANALYSIS POINTS

2. MEASUREMENT UNITS

3. SAVE / RESTORE

4. NEXT PAGE

1. TIME BRKR 04/17/09

2. GET RSLT 10:49:23

3. SET-UP

4. DIAGNOSTICS