User guide

REV 3 DIGITMR USER’S MANUAL
54
e. The following screen will be displayed:
Type the station name using the alpha-numeric keypad, and then press the
[ENTER]
key.
f. The following screen will be displayed:
Type the circuit name using the alpha-numeric keypad, and then press the [ENTER]
key.
g. The following screen will be displayed:
Type the manufacturer name using the alpha-numeric keypad, and then press the
[ENTER] key.
h. The following screen will be displayed:
Type the breaker model information using the alpha-numeric keypad, and then press
the
[ENTER] key.
i. The following screen will be displayed:
Type the breaker serial number using the alpha-numeric keypad, and then press the
[ENTER] key.
Enter SERIAL NUMBER:
_
UP/DOWN TO POSITION
“ENTER” TO CONTINUE
Enter BREAKER MODEL:
_
UP/DOWN TO POSITION
“ENTER” TO CONTINUE
Enter MANUFACTURER:
_
UP/DOWN TO POSITION
“ENTER” TO CONTINUE
Enter CIRCUIT name:
_
UP/DOWN TO POSITION
“ENTER” TO CONTINUE
Enter STATION name:
_
UP/DOWN TO POSITION
“ENTER” TO CONTINUE