User guide

DIGITMR USER’S MANUAL REV 3

NOTE

If a rotary encoder (transducer) is used, the correct “distance/degree”

value must be entered before timing the circuit breaker.

Press the [1] key (ENGLISH (In./deg)) for English measurement units. The

following screen will be displayed:

Press the [CLEAR] key, and then type the desired value using the

numeric key pad. Press the [ENTER] key, and you will be returned to

the “START-UP” menu.

Press the [2] key (METRIC (MM/deg)) for Metric measurement units. The

following screen will be displayed

Press the [CLEAR] key, and then type the desired value using the

numeric key pad. Press the [ENTER] key, and you will be returned to

the “START-UP” menu.

MM/DEGREE

47.65 MM/Deg

INCHES/DEGREE

5.813 In/Deg