User Manual

Auto‐Ohm200S3/DMOM‐200S3/DMOM‐600USER’SMANUAL REV2
10
1.6 DMOM-200 S3 Technical Specifications
Table 2. DMOM-200 S3 Technical Specifications
TYPE Portable Micro-Ohmmeter
PHYSICAL SPECIFICATIONS 18” W x 7” H x 15” D (45.7cm x 17.8cm x 38.1cm); Weight: 19.8 lbs (8.9 Kg)
INPUT POWER 100-240 Vac, 14A, 50/60Hz
RESISTANCE READING
RANGE
10 milliohms at 200 A to 5 ohms at 1A
ACCURACY 1A to 4.99A: 1% ±10 micro-ohms
5A to 9.99A: 1% ±2 micro-ohms
10A to 200A: 1% ±1 micro-ohm
TEST CURRENT RANGE 1 Ampere to 200 Amperes (selectable in 1A steps);
Thermally protected DC p ower supply
DISPLAY Backlit LCD (128 x 64 pixels), viewable in direct sunlight an d low light levels
KEYPAD Rugged, 44key "QWERT Y" membrane keypad
INTERNAL TEST RECORD
STORAGE
128 test records. Each record can contain u p to 64 readings
EXTERNAL TEST RECORD
STORAGE
Up to 999 test records on external USB Flash drive.
COMPUTER INTERFACE RS-232C
PRINTER Built-in 2.5” wide thermal printer
PC SOFTWARE Windows XP/Vista/7 Analysis Software (included with purchase)
SAFETY Designed to meet IEC 61010 (1995), UL 61010a, and CASC22.2 standards
ENVIRONMENT Operating: 10˚C to 50˚C (15˚F to +122˚F)
Storage: 30˚C to 70˚C (22˚F to +158˚F)
HUMIDITY (MAX) 90% RH @ 40˚ C (104˚ F) non-condensing
ALTITUDE (MAX) 2000m (6562 ft) to full safety specifications
CABLES 30 ft (9.1 m), #1 AWG test cables, power cord, ground cable
OPTIONS Shipping case, 15 ft test cables, C-Clamp set, Hand Spike Set, Dual Ground
option
WARRANTY One year on parts and labor

NOTE
Theabovespecificationsarevalidatnominaloperatingvoltageandata
temperatureof25C(77F).Specificationsmaychangewithoutpriornotice.
