User Manual

REV2 Auto‐Ohm200S3/DMOM‐200S3/DMOM‐600USER’SMANUAL
11 
1.7 DMOM-600 Technical Specifications
Table 3. DMOM-600 Technical Specifications
TYPE Portable Micro-Ohmmeter
PHYSICAL SPECIFICATIONS 16.8” W x 12.6” H x 12” D (42.7cm x 32cm x 30.5cm); W eight: 33 lbs (15 Kg)
INPUT POWER 100-120 Vac, 20A, 50/60 Hz – Up to 300A load
220-240 Vac, 20A, 50/60Hz – Up to 600A loa d
RESISTANCE READING
RANGE
1 milliohm at 600A to 450 milliohms at 10A
ACCURACY 10A to 49.9A: 1% ±2 micro-ohms
50A to 600A: 1% ±1 micro-ohm
TEST CURRENT RANGE 10 Amperes to 600 Amperes (selectable in 1 A steps)
DISPLAY Backlit LCD (128 x 64 pixels), viewable in direct sunlight an d low light levels
KEYPAD Rugged, 44key "QWERT Y" membrane keypad
INTERNAL TEST RECORD
STORAGE
128 test records. Each record can contain u p to 64 readings
EXTERNAL TEST RECORD
STORAGE
Up to 999 test records on external USB Flash drive.
COMPUTER INTERFACE RS-232C
PRINTER Built-in 2.5” wide thermal printer
PC SOFTWARE Windows XP/Vista/7 Analysis Software (included with purchase)
SAFETY Designed to meet IEC 61010 (1995), UL 61010a, and CASC22.2 standards
ENVIRONMENT Operating: 10˚C to 50˚C (15˚F to +122˚F)
Storage: 30˚C to 70˚C (22˚F to +158˚F)
HUMIDITY (MAX) 90% RH @ 40˚ C (104˚ F) non-condensing
ALTITUDE (MAX) 2000m (6562 ft) to full safety specifications
CABLES 15 ft (4.6 m), #1/0 AWG test cables, power cord, ground cable
OPTIONS Shipping case, C-Clamp set, Hand Spike Set, Dual Ground option
WARRANTY One year on parts and labor

NOTE
Theabovespecificationsarevalidatnominaloperatingvoltageandata
temperatureof25C(77F).Specificationsmaychangewithoutpriornotice.
