User Manual

REV2 Auto‐Ohm200S3/DMOM‐200S3/DMOM‐600USER’SMANUAL
17 
3.2 Setting the Date and Time
Tosetthedateandtime:
a. Startfromthe“START‐UP”menu:

Pressthe[2]key(SETUP).
b. Thefollowingscreenwillbedisplayed:

Pressthe[4]key(SETTIME)
c. Thefollowingscreenwillbedisplayed:

Typeinthedateusingthekeypad.Thefollowingscreenwillbedisplayed:

Enterthetimeusingthealpha‐numerickeypad.Whenthetimehasbeenentered,you
willbeimmediatelyreturnedtothe“START‐UP”menu.
ENTER TIME
HH:MM:SS
ENTER DATE
MM-DD-YY
1. RECORD ID
2. REVIEW RECORD
3. SAVE/RESTORE RECORD
4. set time
5. set language
1.RUN TEST
2.SETUP
3.QUICK TEST
time: 14:21:34
date: 05/24/11