User Manual

REV2 Auto‐Ohm200S3/DMOM‐200S3/DMOM‐600USER’SMANUAL
19 
3.4 Testing Procedures
3.4.1. Entering Test Record Header Information
Youcanenterthetestrecordheaderinformationbeforeperformingtests.Therecordheader
includesidentifyinginformationsuchasthecompany,station,circuit,manufacturer,etc.Once
theheaderinformationhasbeenset,itwillapplytoallsubsequenttestrecords.Followthe
stepsbelowtoenterthetestheaderinformation:
a. Startfromthe“START‐UP”menu:

Pressthe[2]key(SETUP).
b. Thefollowingscreenwillbedisplayed:

Pressthe[1]key(RECORDID).
c. Thefollowingscreenwillbedisplayed:

Typethecompanynameusingthekeypad.Pressthe[ENTER]keywhenyouaredone
typingthecompanyname.
COMPANY:
_
/ TO POSITION
"ENTER" TO ACCEPT
1. RECORD ID
2. REVIEW RECORD
3. SAVE/RESTORE RECORD
4. set time
5. set language
1.RUN TEST
2.SETUP
3.QUICK TEST
time: 14:21:34
date: 05/24/11