User Manual

Auto‐Ohm200S3/DMOM‐200S3/DMOM‐600USER’SMANUAL REV2
22
3.4.2. Performing a Test
Followthestepsbelowtoperformatest:
a. Startfromthe“START‐UP”menu:

Pressthe[1]key(RUNTEST).
b. Thefollowingscreenwillbedisplayed:

1. YES
Pressthe[1]key(YES)ifyouwouldliketosetthepassingresistancerangefora
test.Thefollowingscreenwillbedisplayed:

Enterthelowerresistancelimitforapassingtestusingthekeypad.Thescreen
willbeupdatedasshownbelow:

Pressthe[ENTER]key.Thefollowingscreenwillbedisplayed:
ENTER LOWER LIMIT:
(0 - 5 ohms)
480 
ENTER LOWER LIMIT:
(0 - 5 ohms)
0 
ENTER PASS/FAIL TEST
LIMITS?
1. YES
2. NO
1.RUN TEST
2.SETUP
3.QUICK TEST
time: 14:21:34
date: 05/24/11