User Manual

REV2 Auto‐Ohm200S3/DMOM‐200S3/DMOM‐600USER’SMANUAL
23 

Entertheupperresistancelimitforapassingtestusingthekeypad.Thescreen
willbeupdatedasshownbelow:

Pressthe[ENTER]key.Continuetostepc.
2. NO
Pressthe[2]key(NO)ifyoudonotwanttoenterthepassingresistancerange
foratest.Continuetostepc.

NOTES
IfusinganAuto‐Ohm200S3withtheDualGroundoption,thefollowing
screenwillbedisplayedbeforethescreenshowninstepc:

1. NO
Pressthe[1]key(NO)ifyouarenotusingacurrentprobeanddonot
wanttousetheDualGroundoption.Continuetostepc.
2. YES
Pressthe[2]key(YES)ifyouhaveconnectedanexternalcurrent
probeandwouldliketousetheDualGroundoption.Thefollowing
screenwillbedisplayed:
CONNECT EXT CURRENT
PROBE TO GND CABLE.
ENSURE THAT THE PROBE
IS TURNED ON!
PRESS ANY KEY
GROUND CURRENT PROBE?
(REDUCED ACCURACY)
1. NO
2. YES
ENTER UPPER LIMIT:
(0 - 5 ohms)
520 
ENTER UPPER LIMIT:
(0 - 5 ohms)
0 