User Manual

REV2 Auto‐Ohm200S3/DMOM‐200S3/DMOM‐600USER’SMANUAL
27 
 IftheDualGroundoptionwasused,thegroundcurrentwillalsobe
displayedasshownbelow:
Pressthe[STOP]keytocontinue.
Ifyouhadselectedthenormaltestoption,continuetostepi.
Ifyouhadselectedtheautomatictestoption,continuetostepj.
i. Thefollowingscreenwillbedisplayed:
Auto‐Ohm200S3 DMOM‐200S3/DMOM‐600

Pressthe[1]key(YES)tosavethereading.

Pressthe[1]key(YES)toprintthetest
resultsontheunit’sbuilt‐inthermal
printer(sampletestresultsprintoutsare
showninFigure10andFigure11).The
followingscreenwillbedisplayed:

Pressthe
[1]key(YES)tosavethereading.


NOTES
Ifyouhadsavedatestreadingbeforethecurrenttest,thedatawillstillbein
theunit’sworkingmemory.Thefollowingscreenwillbedisplayed:
KEEP THIS READING?
1. YES
2. NO
PRINT TEST RESULTS?
1. YES
2. NO
KEEP THIS READING?
1. YES
2. NO
TEST RESULTS
497  p
50.01 A
GND CUR: 0.15 AMPS