User Manual

REV2 Auto‐Ohm200S3/DMOM‐200S3/DMOM‐600USER’SMANUAL
37 
3.5 Working With Test Records
3.5.1. Viewing the Contents of the Working Memory
Wheneveratestisperformedandthereadingiskept,thedataistemporarilystoredinthe
Auto‐Ohm’sworkingmemory.Youcanviewthetestreadingintheunit’sworkingmemory
usingthestepsbelow:
a. Startfromthe“START‐UP”menu:

Pressthe[2]key(SETUP).
b. Thefollowingscreenwillbedisplayed:

Pressthe[2] key(REVIEWRECORD).
c. Thefollowingscreenwillbedisplayed:
Auto‐Ohm200S3 DMOM‐200S3/DMOM‐600
Thebasictestrecordinformationwillbe
displayedasshown:

Pressthe
[] key.Thetestrecorddetails
willbedisplayedasshownbelow:

1. PRINTTOLCD
Pressthe[1]key(PRINTTOLCD)to
displaythetestresultsontheunit’s
LCDscreen.Thebasictestrecord
informationwillbedisplayedas
shown:

PRINT RECORD
1. PRINT TO LCD
2. PRINT TO PRINTER
08/26/11 07:42:23
Num Tests: 1
1. RECORD ID
2. REVIEW RECORD
3. SAVE/RESTORE RECORD
4. SET TIME
5. SET LANGUAGE
1.RUN TEST
2.SETUP
3.QUICK TEST
time: 14:21:34
date: 05/24/11