User Manual

Auto‐Ohm200S3/DMOM‐200S3/DMOM‐600USER’SMANUAL REV2
42
d. Thefollowingscreenwillbedisplayed:


NOTE
IfyouhaveaUSBFlashdriveinsertedintheunit’s“USBMEM”port,the
followingscreenwillbedisplayedinsteadoftheabovescreen:

Pressthe[1]key(INTERNALSTORAGE).
Thefollowingscreenwillbedisplayed:

Continuewiththestepsbelow.
1. ENTERRECORDNUMBER
Pressthe[1]key(ENTERRECORDNUMBER)ifyouknowtherecordnumberthat
youwouldliketorestore.
1.1. Thefollowingscreenwillbedisplayed:

Typetherecordnumberusingthealpha‐numerickeypadandthenpress
the
[ENTER]key.
RESTORE RECORD
NUMBER:
RESTORE RECORD
1.ENTER RECORD NUMBER
2.SCROLL TO SELECT
1.INTERNAL STORAGE
2.THUMB DRIVE
RESTORE RECORD
1.ENTER RECORD NUMBER
2.SCROLL TO SELECT