User Manual

Auto‐Ohm200S3/DMOM‐200S3/DMOM‐600USER’SMANUAL REV2
48
3.5.5. Copying Test Records to a USB Flash Drive
Usethestepsbelowtocopyoneoralltestrecordsfromtheunit’sFlashEEPROMtoa
connectedUSBFlashdrive:
a. MakesureaUSBFlashdriveisconnectedtotheunit’s“USBMEM”port,andthenstart
fromthe“START‐UP”menu:

Pressthe[2]key(SETUP).
b. Thefollowingscreenwillbedisplayed:

Pressthe[3]key(SAVE/RESTORERECORD).
c. Thefollowingscreenwillbedisplayed:

Pressthe
[5]key(COPYTOTHUMBDRIVE).
1. RESTORE RECORD
2. SAVE RECORD
3. RECORD DIRECTORY
4. ERASE RECORD
5. COPY to THUMB DRIVE
1. RECORD ID
2. REVIEW RECORD
3. SAVE/RESTORE RECORD
4. SET TIME
5. SET LANGUAGE
1.RUN TEST
2.SETUP
3.QUICK TEST
time: 14:21:34
date: 05/24/11