Instruction Manual

REV 1 EZCT-2000A USER’S MANUAL

3.4.2. Restoring and Printing a Test Record From a USB Flash Drive

You can restore a test record from a USB Flash drive to the EZCT-2000A’s working memory

using the steps below:

a. Make sure the USB Flash drive containing the test record(s) is inserted in the EZCT-

2000A’s USB Flash drive port (“USB MEM” port). Then start from the “START-UP” menu:

Press the [2] key (SETUP).

b. The following screen will be displayed:

Press the [4] key (SAVE/RES RECORD).

c. The following screen will be displayed:

Press the

[1] key (RESTORE RECORD).

d. The following screen will be displayed:

Press the [2] key (THUMB DRIVE).

e. The following screen will be displayed:

1. INTERNAL STORAGE

2. THUMB DRIVE

1. RESTORE RECORD

2. COPY TO THUMB DRIVE

1. RECORD ID

2. PRINT RECORD

3. RECORD DIRECTORY

4. SAVE/RES RECORD

5. ERASE RECORD

6. NEXT PAGE

1. RUN TEST 02/14/10

2. SETUP 07:39:39

3. TEST PLANS

4. DIAGNOSTIC