Instruction Manual

EZCT-2000A USER’S MANUAL REV 1

3.4.4. Printing a Directory of Test Records Stored in the EZCT-2000A’s Memory

You can print a directory of all the test records stored in the EZCT-2000A’s Flash EEPROM using

the steps below:

a. Start from the “START-UP” menu:

Press the

[2]

key (SETUP).

b. The following screen will be displayed:

Press the

[3]

key (RECORD DIRECTORY).

c. The following screen will be displayed:

NOTE

The above screen will be displayed only if a USB Flash drive is NOT connected

to the EZCT-2000A’s USB Flash drive port. If a USB Flash drive is connected,

the following screen will be displayed:

Press the

[1]

key (INTERNAL DIRECTORY). The following screen will be

displayed:

1. INTERNAL DIRECTORY

2. THUMB DRIVE DIR

PRINT DIRECTORY

1. FULL DIRECTORY

2. SHORT DIRECTORY

1. RECORD ID

2. PRINT RECORD

3. RECORD DIRECTORY

4. SAVE/RES RECORD

5. ERASE RECORD

6. NEXT PAGE

1. RUN TEST 02/16/10

2. SETUP 10:24:25

3. TEST PLANS

4. DIAGNOSTIC