Instruction Manual

REV 1 EZCT-2000A USER’S MANUAL

3.4.5. Printing a Directory of Test Records Stored in a USB Flash Drive

You can print a directory of all the test records in a USB Flash drive using the steps below:

a. Make sure the USB Flash drive is inserted in the EZCT-2000A’s USB Flash drive port

(“USB MEM” port). Then start from the “START-UP” menu:

Press the [2] key (SETUP).

b. The following screen will be displayed:

Press the [3] key (RECORD DIRECTORY).

c. The following screen will be displayed:

Press the

[2] key (THUMB DRIVE DIR).

d. The following screen will be displayed while the directory is printed:

When printing is finished, you will be returned to the “START-UP” menu. A sample

directory printout is shown in Figure 10.

PRINTING DIRECTORY

1. INTERNAL DIRECTORY

2. THUMB DRIVE DIR

1. RECORD ID

2. PRINT RECORD

3. RECORD DIRECTORY

4. SAVE/RES RECORD

5. ERASE RECORD

6. NEXT PAGE

1. RUN TEST 02/16/10

2. SETUP 10:24:25

3. TEST PLANS

4. DIAGNOSTIC