Instruction Manual

EZCT-2000A USER’S MANUAL REV 1

3.4.7. Erasing Test Records From the Flash EEPROM

You can erase individual or all test records stored in the EZCT-2000A’s Flash EEPROM. To erase

a test record:

a. Start from the “START-UP” menu:

Press the

[2]

key (SETUP).

b. The following screen will be displayed:

Press the

[5]

key (ERASE RECORD).

c. The following screen will be displayed:

NOTE

The above screen will be displayed only if a USB Flash drive is NOT connected

to the EZCT-2000A’s USB Flash drive port. If a USB Flash drive is connected,

the following screen will be displayed:

Press the

[1]

key (ERASE INTERNAL REC). The following screen will be

displayed:

1. ERASE INTERNAL REC

2. ERASE THUMB DRV REC

ERASE RECORD

1. ERASE SINGLE REC.

2. ERASE ALL RECORDS

1. RECORD ID

2. PRINT RECORD

3. RECORD DIRECTORY

4. SAVE/RES RECORD

5. ERASE RECORD

6. NEXT PAGE

1. RUN TEST 02/16/10

2. SETUP 10:24:25

3. TEST PLANS

4. DIAGNOSTIC