Instruction Manual

REV 1 EZCT-2000A USER’S MANUAL

3.4.8. Erasing Test Records From a USB Flash Drive

You can erase individual or all test records stored in a USB Flash drive. To erase a test record:

a. Make sure the USB Flash drive is inserted in the EZCT-2000A’s USB Flash drive port

(“USB MEM” port). Then start from the “START-UP” menu:

Press the [2] key (SETUP).

b. The following screen will be displayed:

Press the [5] key (ERASE RECORD).

c. The following screen will be displayed:

Press the

[2] key (ERASE THUMB DRV REC).

1. ERASE INTERNAL REC

2. ERASE THUMB DRV REC

1. RECORD ID

2. PRINT RECORD

3. RECORD DIRECTORY

4. SAVE/RES RECORD

5. ERASE RECORD

6. NEXT PAGE

1. RUN TEST 02/16/10

2. SETUP 10:24:25

3. TEST PLANS

4. DIAGNOSTIC