Instruction Manual

EZCT-2000A USER’S MANUAL REV 1

c. The following screen will be displayed:

Use the alpha-numeric keys on the keypad to enter a test note and press the [ENTER]

key.

d. The following confirmation screen will be displayed showing the test parameters:

Press the [START] key to begin the test.

e. The EZCT-2000A will start performing the test per the test plan parameters. When the

test has finished, the following screen will be displayed:

Press any key to continue.

f. The following screen will be displayed:

Press the

[1] key (YES) if you would like to print the test results.

Press the

[2] key (NO) if you do not want to print the test results.

print test results?

1. YES

2. NO

ANY KEY TO CONTINUE

=77.6 V

=0.3876

I=0.0522 RAT=+200.08

TEST 1 parameters:

300V 2.0A x1-x2

"START" to begin

ENTER TEST 1 NOTE:

↑↓ to position

"ENTER" TO ACCEPT