Instruction Manual

REV 1 EZCT-2000A USER’S MANUAL
73
3.5.10. Unloading a Test Plan from the Working Memory
To unload the test plan from the working memory and clear all the test plan parameters:
a. Start from the “START-UP” menu:
Press the [3] key (TEST PLANS).
b. The following screen will be displayed:
Press the [2] key (UNLOAD TEST PLAN).
c. The following screen will be displayed:
Press any key to return to the “START-UP” menu.
TEST PLAN UNLOADED!
1. load test plan
2. unload test plan
3. plan directory
4. extract test plan
5. print test plan
6. erase test plan
7. copy to thumb drive
1. RUN TEST 02/16/10
2. SETUP 10:24:25
3. TEST PLANS
4. DIAGNOSTIC