Instruction Manual

EZCT-2000A USER’S MANUAL REV 1

4.4 Printing Raw Memory Buffer Data

You can print the raw data from the EZCT-2000A’s memory buffer for diagnostic purposes. This

will print a table of current and voltage values stored in the unit’s working memory. To print the

raw buffer data:

a. Start from the “START-UP” menu:

Press the [2] key (SETUP).

b. The following screen will be displayed:

Press the [6] key (NEXT PAGE).

c. The following screen will be displayed:

Press the

[4] key (PRINT RAW DATA). The raw buffer data will be printed and you will be

returned to the “START-UP” menu.

1. SET TIME

2. buried ct in delta

3. knee point marker

4. print raw data

1. RECORD ID

2. PRINT RECORD

3. RECORD DIRECTORY

4. SAVE/RES RECORD

5. ERASE RECORD

6. NEXT PAGE

1. RUN TEST 02/16/10

2. SETUP 10:24:25

3. TEST PLANS

4. DIAGNOSTIC