User Manual

TRM-203 AND TRM-403 USER’S MANUAL REV 1

r. The following screen will be displayed after the last “Raise” position’s resistance reading

is stored:

1. YES

Press the [1] key (YES) to print the test results on the built-in thermal printer. A

Typical LTC/Voltage Regulator test report is shown in Figure 7. Continue to step s.

2. NO

Press the [2] key (NO) to bypass printing of the test results. Continue to step s.

s. The following screen will be displayed:

1. YES

Press the [1] key (YES) to save the test record. The following screen will be

displayed:

Press any key to return to the “START-UP” menu.

2. NO

If you do not wish to save the test record, press the

[2] key (NO). The following

screen will be displayed:

record number 09

has been saved!

SAVE THIS RECORD?

1. YES

2. NO

PRINT RECORD?

1. YES

2. NO