User Manual

REV 1 TRM-203 AND TRM-403 USER’S MANUAL

1. YES

Press the [1] key (YES) if you wish to convert readings to standard temperature. The

following screen will be displayed:

Press the [1] key (COPPER, Tk=234.5) to select copper as the winding material.

Continue to step h.

Press the

[2] key (ALUMINUM, Tk=225) to select aluminum as the winding material.

Continue to step h.

Press the

[3] key (MANUALLY ENTER Tk) to manually enter the Tk value. The

following screen will be displayed:

You can increase the Tk value by 0.5°C increments by pressing the [∧] key.

You can decrease the Tk value by 0.5°C increments by pressing the

[∨] key.

Press the [ENTER] key to confirm the temperature setting. Continue to step h.

2. NO

Press the [2] key (NO) if you do NOT wish to convert readings to standard

temperature. Continue to step j.

TK:

230.0°C

↑↓ to adjust tk

"ENTER" to accept

WINDING MATERIAL:

1. COPPER, TK=234.5

2. ALUMINUM, TK=225.0

3. MANUALLY ENTER TK