User Manual

TRM-203 AND TRM-403 USER’S MANUAL REV 1

h. The following screen will be displayed:

Use the

[∧] and [PAPER ∨ Contrast] keys to adjust the D.U.T. (Device Under Test)

temperature.

Press the

[ENTER] key to confirm the D.U.T. temperature setting.

i. The following screen will be displayed:

Use the [∧] and [∨] keys to adjust the reference temperature.

Press the [ENTER] key to confirm the reference temperature setting.

j. The following warning screen will be displayed:

This warning is a reminder that the next sequence of test steps will run current through

the test load.

Press any key to continue.

***** WARNING! *****

DANGEROUS FLASH-OVER

WILL OCCUR IF CABLES

ARE DISCONNECTED!

********************

REFERENCE TEMP:

75.0°C 167.0°F

↑↓ to adjust tk

"ENTER" to accept

D.U.T. TEMP:

25.0

°C 77.0°F

↑↓ to adjust tk

"ENTER" to accept