Owner's manual

WRM-10 USER’S MANUAL REV 2
15
e. The following screen will be displayed while the test is being performed:
After the transformer has been charged, the following screen will be displayed:
Run the voltage regulator tap switch.
f. If no transient is detected as the taps are switching:
1. The screen display will not change
2. Turn or press the [CONTROL KNOB] to end the test. The following screen will
be displayed:
If a switch break is detected:
1. The following message will be displayed:
2. Turn or press the [CONTROL KNOB] to end the test.
TRANSIENT
DETECTED
NO TRANSIENT
DETECTED
V REG. TEST
RUN TAPS NOW
*XFMR CHARGING*