Manual

REV 3 WRM-10P AND WRM-40 USER’S MANUAL

Press the [1] key (COPPER, Tk=234.5) to select copper as the winding material.

Continue to step d.

Press the [2] key (ALUMINUM, Tk=225) to select aluminum as the winding

material. Continue to step d.

Press the [3] key (MANUALLY ENTER Tk) to manually enter the Tk value. The

following screen will be displayed:

You can increase the Tk value by 0.5°C increments by pressing the [PAPER ∧

Contrast]

key.

You can decrease the Tk value by 0.5°C increments by pressing the [PAPER ∨

Contrast]

key.

Press the [ENTER] key to confirm the temperature setting. Continue to step e.

2. NO

Press the [2] key (NO) if you do NOT wish to convert readings to standard

temperature. Continue to step e.

e. The following screen will be displayed:

Use the

[PAPER ∧ Contrast] and [PAPER ∨ Contrast] keys to adjust the D.U.T.

(Device Under Test) temperature.

Press the [ENTER] key to confirm the D.U.T. temperature setting.

f. The following screen will be displayed:

Use the [PAPER ∧ Contrast] and [PAPER ∨ Contrast] keys to adjust the

reference temperature.

Press the

[ENTER] key to confirm the reference temperature setting.

REFERENCE TEMP:

85.0°C 185.0°F

↑↓ to adjust temp

“ENTER” to accept

D.U.T. TEMP

25.0°C 77.0°F

↑↓ to adjust temp

“ENTER” to accept

Tk:

230.0°C

↑↓ to adjust Tk

“ENTER” to accept