Manual

REV 3 WRM-10P AND WRM-40 USER’S MANUAL

When the pre-defined test time has elapsed, the following screen will be displayed:

Press any key to continue.

k. The following screen will be displayed:

1. YES

Press the [1] key (YES) to save the test record. Continue to step l.

2. NO

Press the [2] key (NO) if you do not want to save the test record. The following

screen will be displayed:

Press the [1] key (DO NOT SAVE RECORD) if you do not want to save the record.

You will be returned to the “START-UP” menu.

Press the [2] key (SAVE RECORD) to save the record. Continue to step l.

l. The following screen will be displayed:

NOTES

• The record number is automatically assigned and incremented by the WRM.

• Once the test record has been saved, it can be recalled and printed (see

section 3.9.1 for further information). Figure 15 shows a typical Special Test

report printout.

Press any key to return to the “START-UP” menu.

RECORD NUMBER 02

HAS BEEN SAVED!

ARE YOU SURE?

DATA WILL BE LOST!

1. DO NOT SAVE RECORD

2. SAVE RECORD

SAVE THIS RECORD?

1. YES

2. NO

TEST RESULTS

I=10.01A R1=499 μΩ

R2=501 μΩ