User Guide

01
02 03 04
05 06
Clamp Arms
Grip Nut
Silicone Pads
Quick Release Button
Adjustable Bottom Tray
Contents / Inhalt / 目次
Ball Joint
3-level Air Vent Clip
3-level Air Vent Clip Lever
Screw Knob
Twist-lock Air Vent Clip
Ball Joint
Attention: To protect
your air vent blade,
please adjust the air
vent clip properly and
do not use the air vent
clip too tight.
horizontal and vertical
non-intensive, circular or special-shaped
Support
Nonsupport
1. Take out the grip nut, assemble it with vent clip.
2. Find a suitable place at your automobile outlet, insert the car
mount.
1. Press the quick release button, the clamp arms automatically
pop open.
3. Place your phone and find the press position (a dent place with
tiny microdots on the clamp arms) to push, tighten up the clamp
arms to hold your phone firmly.
2. If you have a larger size phone, please pull down the adjustable
bottom tray on the car phone holder according to the phone size to
place your phone suitably. Then fix the phone in the same way like
step 3, so that the phone could be clamped firmly.
4. After using, please press the quick release button again to open
the clamp arms and take out the mobile phone as shown in the
picture.
使用説明
Using Steps
05
Overview
01
Installation Steps
03
19
15
17
Installationsschritte
12
Produktübersicht
08
10
Specifications
07
07
Attentions
21
21
14
Spezifikationen
14
Achtung
Schritte zur Nutzung
商品詳細
組付説明
注意事項
商品説明
User manual
Benutzerhandbuch
取扱説明書
[e-mail]
www.vanmasslife.com
24h
Overview
The Suitability of Car Air Vent
Installation Steps
Using Steps