Owner`s manual

Specifications and Features
IT SERIES Industrial True Sine Wave Inverter Owners Manual
7
Figure 2
Specifications for models rated 2600 watts and higher
Model Number
SPECIFICATIONS
IT12-2600
IT12-2800 IT12-3000 IT12-3200
IT12-3600PL
IT24-3500
AC Power Output
Rated Output Watts * 2600W 2800W 3000W 3200W
3600W for
30 minutes
minimum**
3500W
Continuous Output
21.7A
2600W
23.3A
2800W
25.0A
3000W
26.7A
3200W
30.0A
3600W
29.2 A
3500W
Surge Output at 3 seconds 42.1A 42.6A 43.2A 43.7A 43.7A 83.0A
Output Waveform True Sine Wave
Total Harmonic Distortion Less than 4% THD for all loads up to surge output
Output Voltage 120 Volts ± 5%
Output Frequency 60 Hz ± 0.025 Hz (0.04%)
DC Input Voltage Range
IT12-XX.XX = 10.5 - 16.6 VDC / IT24-3500 = 21.0 TO 33.2 VDC
DC Input Current
Inverter OFF 1 ma
Inverter ON in Load Demand
Mode (No AC load)
IT12-XXXX =0.5 amps / IT24-3500 = .255 amps
Full load at 12VDC 285A 315A 340A 365A 365A 170A
AC Output Wiring Method
One Built-in Receptacle GFCI Duplex Receptacle protected by a 15 amp circuit breaker
Output AC-1: protected by a 20 amp circuit breaker on models up through
2400 watts, 30 amp circuit breaker on models 2600 watts and higher
Two Hardwire Output Circuits
Output AC-2 protected by the 15 amp GFCI feedthrough on all units
System
Ambient Operating
Temperature
-40 to +105ºF (-40 to +40ºC)
Cooling Air Thermostatically controlled intake fan
Enclosure White painted aluminum
Dimensions - All Models 8.0"H x 13.75"W x 15.75"D
Unit Weight 71 Ibs 72 Ibs 73 lbs
75 lbs 75lbs 75 lbs
*Note: The inverter will try to power any load, even a short circuit, for 3 seconds. When the load exceeds the
inverter's rated output the Overload Indicator Light will turn ON. After 3 seconds, the inverter will reduce
the AC Output Voltage as needed to limit the AC Output Current. If the inverter reduces output voltage
below 108 volts for 10 seconds, the inverter will shut itself OFF for Overload.
** At 77ºF(25ºC) the IT12-3600 can produce 3600 watts for at least 30 minutes before overheating.