Owner`s manual

INCOR POR ATED
®
Installation
ITC-Series Inverter Page 9 Owner‟s Manual 10/7/05
Equalize button access
Through Access hole.
Overload Overload
Low Battery Bulk
Fault Fault
INCORPORATED
Inverter
On/Off
Charger
On/Off
On/Off Switch for Inverter
On/Off Switch for Charger
Serial Communications
Connection
Configuration Switches
for Programming
Configuration Switches Access
Configuration Switches
Note: Power Must be
Cycled to read a new
DIP Switch value
F 3 Figure 1.4-2 ITC Control/Display Unit
F 4 Figure 1.4-3 ITC Control/Display Unit Component Identification
ITEM
DESCRIPTION
1
Inverter Indicator
Light
Solid when on, flashes when enabled but not on
2
Inverter On/Off
Button
Enables/Disables Inverter Function
3
Charger Indicator
Light
Solid when on, flashes when enabled but not on
4
Charger On/Off
Button
Enables/Disables Charger Function
5
Overload Light
Indicates if Inverter Overloaded
6
Low Battery/Bulk
Light
Dual Purpose – Indicates Low Battery in Inverter Mode – In charger mode, if on indicates that
Charger is in Bulk Mode and if in Equalize, this light flashes.
7
Fault Light
Dual Purpose – Indicates that a fault has occurred in the inverter or Charger – Could be a Over
Temperature shutdown, Low/High Battery Shutdown, Power Stage Fault.
8
Equalize Button
Access
This is used to enable the equalization cycle on the battery during charging.
Overload Overload
Low Battery Bulk
Fault Fault
INCORPORATED
Inverter
On/Off
Charger
On/Off
1
2
3
4
5
6
7
8