Operating instructions

ManualsBrandsVanner ManualsConsumer electronicsVLT24-1500

Installation of options is a matter of plug-and-play

VLT® HVAC Drive D Options & LCP

VLT® 24 V DC Supply Option MCB 107

Graphical Local Control Panel LCP 102

Numerical Local Control Panel LCP 101

LCP Panel Mounting Kit

The option is used to connect an external DC supply

to keep the control section and any installed

option active when mains power is down.

■ Input voltage

range.................. 24 V DC +/- 15% (max. 37 V in 10 sec.)

■ Max. input current ........................................................2.2 A

■ Max. cable length .........................................................75 m

■ Input capitance load .............................................. < 10 uF

■ Multi-language display

■ Status messages

■ Quick Menu for easy commissioning

■ Parameter setting and explanation of parameter

function

■ Adjustment of parameters

■ Full parameter backup and copy function

■ Alarm logging

The numerical control panel oﬀ ers an excellent MMI

interface to the drive.

■ Status messages

■ Quick menu for easy commissioning

■ Parameter setting and adjustment

For easy installation of the LCP 101 and LCP 102 in e.g.

a cabinet.

■ IP 65/Type 12 (front)

■ Thumb screws for tool-free installation

■ Incl. 3 meters of cables in industry quality (also

available separately)

■ With or without LCP operating unit

■ Each time easy to install

Ordering number 130B1117 (Mounting kit for all LCP’s

including fasteners, 3 m cable and gasket).

■ Power-up delay ...........................................................< 0.6 s

■ Easy to install in drives in existing machines

■ Keeps the control board and options active during

power cuts

■ Keeps ﬁ eldbuses active during power cuts

Ordering number 130B1108 uncoated – 130B1208 coated

(Class 3C3/IEC 60721-3-3)

■ Info button – explains the function of the selected

item on display

■ Hand-operated start/stop, or automatic mode

selection

■ Reset function

■ Trend graph

Ordering number 130B1107

■ Hand-operated start/stop function or automatic

mode select

■ Reset function

Ordering number 130B1124

Ordering number 130B1113 (Incl. graphical LCP, fasteners,

3 m cable and gasket).

Ordering number 130B1114 (Incl. numerical LCP, fasteners

and gasket).

Ordering number 130B1129 (LCP front mounting

IP 55/IP 66) – Ordering number 175Z0929 (cable only).

Ordering number 130B1170 (Panel Mouting Kit for

all LCP w.o. cable).

Typecode Position

LCP