Charging Module Owners Manual

-22ºF to +140ºF (-30ºC to +60ºC)Temperature Range:

D916717,

Vanner, Inc.

GENERAL

SPECIFICATIONS

VSS-USB

Owners Manual

The Vanner VSS Series USB Module is designed to operate in the cab of any vehicle. The USB module is

capable of charging many USB powered devices. The module is reverse polarity protected on the input and

short circuit protected on the output. It has been designed to work in +12V and +24V applications, it will

sense the input voltage and adjust accordingly. As with any electrical device a fuse should be installed on the

input of the VSS-USB.

Supply Voltage:

Input Supply Current:

8-32Vdc

14mA @ 12Vdc no load (1.1A @ 12Vdc max load) ÷ 2 @ 24Vdc

Weight: < 1.0 Lbs.

Max Total Output Supply: +5V 2.1A

11.5" Black:

Battery Negative

11.5" Red:

+12Vdc or +24Vdc

Electrical Connection

The battery supply input should be protected with a 10A fuse.

PAGE 1
VSS-USB Owners Manual GENERAL The Vanner VSS Series USB Module is designed to operate in the cab of any vehicle. The USB module is capable of charging many USB powered devices. The module is reverse polarity protected on the input and short circuit protected on the output. It has been designed to work in +12V and +24V applications, it will sense the input voltage and adjust accordingly. As with any electrical device a fuse should be installed on the input of the VSS-USB.
PAGE 2
VSS-USB Owner's Manual Overall Dimensions 0.710 3.142 2.136 Ø 0.133 2.600 Notes: Corporate Office: 4282 Reynolds Drive Hilliard, Ohio 43026 Tel (614) 771-2718 Fax (614) 771-4904 www.vanner.com D916717-B, Vanner, Inc 2014 Specifications subject to change without notice.