User's Manual

Introduction
The VSUB233 is an RF transceiver module. It interfaces with other
equipment using standard serial asynchronous communications protocol at a rate
between 600 and 57600 baud. The transmitter has a peak output power of
31.6mW. The device operates under FCC approval in the 902-928 MHz ISM
frequency band as well as the 433.075 – 434.775 MHz LPD frequency band.
Installing the VSUB233
The VSUB233 may be plugged into any properly located 120VAC outlet
inside a weather proof environment. Proper operation is indicated by an LED
indicator on the front of the device.
Wording for External Label
FCC ID: PII-VSUB233
IC: 3505A-VSUB233
This device complies with Part 15 of the
FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference,
and (2) this device must accept any interference
received, including interference that may cause
undesired operation.