Specifications

33
Calibration arm assemblyDoubling prism
R type mounting postT type guide plate
Tonometers | KAT
®
Accessories
KAT
®
AccessoriesKAT
®
Technical Specifications
The T type and R type KATs
®
are supplied with a reusable
doubling prism, the calibration check bar and either the R type
post or the T type aluminium guide plate for Slit Lamp use.
Protective case
To protect your investment when travelling or for when the
instrument is not in use, our high quality aluminium carrying
case will ensure your tonometer is always stored and protected.
Part numbers
Accessories
3414-P-7000 KAT Aluminium carrying and storage case
2414-P-5001 KAT doubling prism
2414-P-5032 KAT T type guide plate
2414-P-5042 KAT R type mounting post
2414-P-5005 Calibration arm assembly
Protective carrying case
Measurement force By leverage weight
Installation: Fitted to the guide plate
Keeler T type: for tower on the optical axis for
illumination Slit Lamps the microscope and
illumination unit arm
Keeler R type: for tower Mountable on a post fitted to
illumination Slit Lamps the microscope optical body
Measurement range 0 - 80 mmHg
(0 – 10.64 kPa)
Approximation of the impact Standard divergence:
force on the measurement 0.49 mN <_ 3s <_ 1.5% of
head for a 0 to 58,84 mN nominal value
measurement range
Operating temperature range from 10°C to 35°C
Measurement accuracy <_ 0.49 mN
Net weights:
Keeler T type 0.41 kg (without accessories)
Keeler R type 0.69 kg (without accessories)
Keeler BQ type 0.712 kg (without accessories)