Operation Manual

Chapter 4 >> Initial Settings and Operations

English

Getting Started

Setting the Clock

1 Select the desired time zone using the Arrow

(▲/▼) buttons

2 Select if you want to use daylight saving time

using the Arrow (▲/▼) buttons. Select between

On and Off

3 Press the blue button to continue.

Antenna Setting Tuner 1

You can set antenna and LNB information for

scanning channels. If antenna is not correctly set,

you cannot scan channels, therefore you cannot

watch any programs.

1 Select Antenna Setting using the Arrow (▲/▼)

buttons and press the OK button.

Antenna setting menu appears.

2 Select satellite for channel scan using the Arrow

(▲/▼) or Page (+/-) buttons and press the

Arrow (◄/►) button to select at option.

3 Select an option using the Arrow buttons.

LNB Power: On or Off (Defaulf: Off)

Longitude: Using Defaultmode

LNB Type: Universal 1, Universal 2 (Default

Universal 1)

LNB Freq: Frequency can be input with

numeric key with RCU

DiSEqC Port:1~4 for 1.0 and Tone Burst 1~2 and Off.

Tone 22kHz: On, Off or Auto (Default: Auto)

Unicable:

Press OK Button to choose one IF by Auto detection

Motor: Moving Antenna unsing DiSEqC1.2 or USALS

DiSEqC1.1: Uncommited DiSEqC Command 1-16