Operation Manual

Chapter 4 >> Initial Settings and Operations
16
English
Terrestrial (optional) Auto
Scanning
1 Press OK Key to start Auto Scanning.
2 Press the OK button to save the changes.
3 Press Back Key button to exit from the menu
and press the Arrow (▲/▼) buttons to select
the desired channel. Now you can watch TV
or listen to the Radio. You can no select the
channel using arrow buttons (▲/▼)
Basic Operation
This section explains various functions while watching TV or listening to the Radio.
Switching Channel
You can switch the current channel by three different methods.
• Method 1: Press the Arrow (▲/▼) buttons or PR+/- buttons.
• Method 2: To select a channel directly, select a channel using the Numeric (0~9) button.
• Method 3:
1 To display the channel list, press the OK button.
2 Select a channel you want to watch using the Arrow (▲/▼) buttons and then press the OK
button.
• If there are multiple channels, use the Page (+/-) or the Arrow (◄/►) buttons to move to
channels by page.
• Press the Mode (
) button to switch between the TV and Radio channel.
• Method 4: In case of more than two scanned satellites
1 Press the SAT(
) button to show satellite list.
2 Move the cursor to the satellite of a channel to watch with the Arrow (◄/►) buttons and
then press OK button.
3 You can follow the method 3 instruction for channel selection.
• Method 5: How to move to the watched channel.
1 Press the last button with RCU.
2 Press OK button after a channel selection by using the Arrow (▲/▼) with RCU.
3 Press OK button to exit.
Volume Control
To control the volume:
• Press the VOL+/- or the Arrow (◄/►) buttons.
• Press the Mute (
) button to turn the sound off.
• Press the Mute (
) button again or the VOL+/- or Arrow (◄/►) buttons to cancel muting.