Operation Manual

Chapter 5 >> Main Menu
21
English
M ain Menu
The menu has been carefully designed from user-friendly point of view to assure easy operation
to your receiver. The main menu is classied into 7 sub menus that will carry out the various
operations individually.
Installation
In the Installation menu, you can customize antenna setting and do channel scanning.
Press the Menu button.
Select Installation using the Arrow (◄/►) buttons on the main menu.
Installation >> Antenna Setting
Antenna Setting TUNER 1 or Tuner 2
You can set antenna and LNB information for
scanning channels. If antenna is not correctly set,
you cannot scan channels, therefore you cannot
watch any programs.
1 Select Antenna Setting using the Arrow (▲/▼)
buttons and press the OK button.
Antenna setting menu appears.
2 Select satellite for channel scan using the Arrow
(▲/▼) or Page (+/-) buttons and press the
Arrow (◄/►) button to select at option.
3 Select an option using the Arrow buttons.
 LNB Power
Set LNB Power On.
 Longitude
If you know the exact longitude of your location, use the Numeric (0~9) buttons.
Toggle between E (East) and W (West) using the Arrow (◄/►) buttons.
 LNB Type(Unicable)
Select the LNB type by pressing Arrow(◄/►) button
- Universal 1 (9750 / 10600)
- Universal 2 (9550 / 10750)
- Unicable (1210 IF / 1420 IF / 1680 IF / 2040 IF)
• Select the Unicable and press OK Button to choose one IF by Auto detection
(When you use Unicable, Blind Scan function will be not supported)
- User Dene (LNB Low / LNB high)
• LNB IF Frequency can be input with numeric key with RCU
- Standard (5150 / 9750 / 10000 / 10600 / 10750 / 11250 / 11300 / 11475)