Operation Manual

Chapter 5 >> Main Menu

English

9 Conrm the Enable Limits/Disable Limits function pressing the OK button. You will

be prompted to decide whether to use the West/East setting Limits setting value.

10 The method to position motor is selected in the Continuous/Step (Impulses)/Time

(Seconds) menu. If you press the Arrow (◄/►) buttons once in the Continuous mode,

selected TP signal of the satellite is locked or the motor stops to move. In the Step

(Impulses) mode, you can select Steps (Pulse) from 1 to 10. The motor changes its

position according to the selected step if moved to the left or right (depending on the

motor).

In the Time (seconds) mode, you can select time (seconds) from 1 to 20. The

motor changes its position according to the selected step if moved to the left or right

(depending on the motor).

 USALS

1 Select Motor Setting using the Arrow

(▲/▼) buttons and press the OK button.

Select Satellite menu using the Arrow

(▲/▼) buttons and press the OK button.

Satellite list appears. Select satellite using

the Arrow (▲/▼) buttons and press the

OK button. Bulleted list indicates selected

satellites.

Press the RED button to save selected

satellites and then press the Back button.

If you press the YELLOW button, on-

screen navigation menu is highlighted. Use the Arrow buttons to move the motor to

the west, east, north, and south in order. Position of the motor can be restricted to the

software setting limits (West/East) using the RED / BLUE buttons.

Press the YELLOW button to highlight Satellite.

• This function may not work depending on the type of USALS program.

Enter the value of 000.0 E/W (latitude) and 000.0 N/S (Longitude) and then press the

OK button on the Go to X menu.

Motor changes its position according to the selected satellite.

Conrm the Enable Limits/Disable Limits function pressing the OK button. You will

be prompted to decide whether to use the West/East setting Limits setting value.

• This function may not work depending on the type of USALS program.

• Press OK in Go to Reference menu, the motor moves at zero longitude/latitude.

Installation