Operation Manual

Chapter 5 >> Main Menu

English

Installation >> Tuner (1 or 2) >> Auto Scanning

Auto Scanning

If you select the satellite to scan channel according to the antenna setting, your receiver can

automatically scan the satellite without entering any other information.

1 Select Auto Scanning using the Arrow (▲/▼)

buttons on the Installation menu and press the

OK button.

2 Select satellite to scan channels by using the

Arrow (▲/▼) buttons and select scan mode

(All, Free or NIT) using the Arrow (◄/►)

button.

• All: Scans all channels.

• Free: Scans free channels only.

• NIT: Scan All mode with TP network scanning.

Press the OK button, and then it starts scanning.

After Auto Scanning completes, you can see TV and Radio channels in the list.

Installation >> Manual Scanning

Manual Scanning

You can scan channels of the selected satellites

by transponders if you know the transponder

information.

Select Manual Scanning using the Arrow

(▲/▼) buttons on the Installation menu and

press the OK button.

Set the following options to complete Manual

Scanning.

 Satellite:

Select a satellite by using the Arrow(▲/▼

◄/►)buttons or Page (+/-) buttons.

 Transponder:

Set the transponder for the selected satellite.

Select a transponder using the Arrow (◄/►) buttons.

Installation