Operation Manual

Chapter 5 >> Main Menu

English

If you cannot nd your desired transponder, select New to change transponder information

as follows:

• Frequency

Display the selected TP Frequency.

• Symbol Rate

Display the selected TP Symbol Rates.

• FEC (Forward Error Correction)

Select a FEC option Auto, 1/2, 2/3, 3/4, 5/6, and 7/8 using the Arrow buttons.

• Polarity

Select a polarity value among Horizontal, Vertical, Circular Left, and Circular Right

using the Arrow buttons.

• Horizontal output is 18V and Vertical output is 13V via LAN.

Note

• What is a transponder?

A wireless communications device usually attached to a satellite. A transponder

receives and transmits incoming signals with in a prescribed frequency range. After

receiving the signals the transponder will broadcast those signals with different

frequencies

 Scan Mode

Decide whether to nd free channels only or all the channels including scrambled ones.

Select a scan mode using the Arrow (◄/►) buttons.

• All: Scans all types of channels.

• Free: Scans free channels only.

 NIT Search

You will be asked whether to search channels for another transponder.

Select either Yes or Off using the Arrow (◄/►) buttons.

Select Yes to run Network Search.

 PID Search

You can manually scan channels by entering individual Packet Identier (PID) values.

Enter the PID the Numeric (0~9) buttons.

First, select a PID type (Video PID, Audio PID, or PCR PID) using the Arrow (◄/►)

buttons, then enter the PID value by pressing the Numeric (0~9) buttons.

Press the OK button, then starts scanning.

After Auto Scanning is complete, you can see TV and Radio channels found from Auto

Scanning.

Installation