Operation Manual

Chapter 5 >> Main Menu

English

4 Press the RED (MoSAiC) button on the Manual Scan menu

• Satellite: Select the satellite by using Arrow(▲/▼◄/►)buttons or Page (+/-) buttons

• Transponder: Change the TP with the Arrow(◄/►)buttons

• Frequency: Displays the current Frequency

• Symbol Rate: Displays the current Symbol Rate

• FEC (Forward Error Correction): Displays the current FEC

• Polarity: Displays the current Polarity

• Add TP: Press the Green (Sleep) button for a new TP add

• Del TP: Delete the current TP with Yellow button

• RED button: Save the TP information

Blindscan

1 Press OK Key to open Blindscan menu.

2 Select Start- and Endfrequency from the area

that would you like to search.

3 Select the stepping for searching for

transponders.

4 Select polarisation.

5 Select if you want to limit your search for FTA

channel or choose all channels.

6 Start blindscan with OK Key.

Note: Blindscan search the satellite for every carriers; even undocumented If the receiver

nd some channels or transponders he will automatically add it to your channel/transpon-

derlist.

Installation