Operation Manual

Chapter 5 >> Main Menu

English

System Setup >> OSD Setting

OSD Setting

You can adjust OSD Transparency, Window Trans

OSD Banner Time, and Screen Saver Time.

Select OSD Setting using the Arrow (▲/▼)

buttons on the System Setup menu and press

the OK button.

Select any of Transparency, Window Trans,

Screen saver Time, VFD Module and Display

in Standby Mode, and Screen saver Time

using the Arrow (▲/▼) buttons and use the

Arrow (◄/►) buttons to make changes.

• Transparency: 0 (opaque) to 100%

• Window Trans: 0 (opaque) to 100%

• Banner Time: 1 to 60 seconds or Always

• Screen saver Time: 1 to 60 minutes or None

• Serial Module: X-crypt or None

System Setup >> Video Setting

Video Setting

You can enter the various media setting for TV

System, TV Aspect Ratio, Video Aspect Ratio, RGB,

Y/Pb/Pr or Composite, RF Channel, Broadcasting

System, Video Freeze and DVB Subtitle.

Select Media Setting using the Arrow (▲/▼)

buttons on the System Setup menu and press

the OK button.

Select Media Setting using the Arrow (▲/▼)

buttons and press the Arrow (◄/►) buttons to

make changes.

• TV System: 576p, 720p, 1080i

• TV Aspect Ratio: You can set the aspect ratio of your TV. (4:3,16:9 or Auto)

• VideoAspectRatio:You can select the display format according to TV screen ratio.

(Letter Box, Pan & Scan, Mixed, or Full)

• VideoSignalType:RGB, Y/Pb/Pr, Composite (see Page 51)

• VideoFreeze:On/Off

System Setup