Operation Manual
Chapter 5 >> Main Menu
36
English
Channel Setup >> Software Manager
Software Manager
You can download the software of your receiver
through satellite when the new software is available
for your system. During download, don’t turn off
your receiver. In case of the power is turned off,
turned on your receiver again to complete the
download.
1
Select Software manager using the Arrow
(▲/▼) buttons on the Installation menu and
press the OK button.
• Software Upload: Copies all the data from
Master STB to Slave STB.
• Channel Upload: Copies only the channel data from master STB to Slave STB.
Connects both Master and Slave STB using RS232C Cable and then press the OK button
on the Software Upload menu for the Master STB.
• OTA Software Download: Main Software can be updated over the air.
• OTA Channel Download: Channel Data can be updated over the air.
Info: OTA means that new software are updated „Over The Air“. New software also means there
are new functions and xed errors. Keep you software up to date with OTA Software Downloads
Parental Lock
You can lock the channels to prohibit unauthorized users from watching specic channels. Press
the Menu button. Select Parental Lock using the Arrow (◄/►) buttons on the main menu
Parental Lock >> Channel Lock
Channel Lock
Whenever you want to see the locked channel you
will be prompted to enter the PIN Code in the dialog
box.
1
Select Channel Lock using the Arrow (▲/▼)
buttons on the Parental Lock menu and press
the OK button.
2
Select the channel that you want to use the
Arrow (▲/▼), PR+/-, Page (+/-), or Numeric
(0~9) buttons and press the OK button.
Selected channel will be displayed with locking-
marked. Press it again to clear.
Arrow (◄/►) buttons: Switches between TV
and Radio List.
3
Press the RED button to conrm.
Channel Setup