Operation Manual

44
Timer records:
A Timer let your box start , switch to the chosen
channel and start recording automatically. After end-
ing this task the Receiver will fall back in his original
mode ( Standby ).
You can open the Timer menu by pressing the Timer
button or choose Timer menu out of the System
menu.
Pick start and end time, if you want to do a record and
the channel you wish to record as well.
Store your settings by pressing the OK Button
Note: You can set up to 40 Timers.
Timer recording out of EPG (Guide)
You can set Time in EPG as well
Please follow these steps:
1. Start EPG by pressing the Guide Button.
2. Use the navigation keys to choose a event in your EPG.
3. To set a timer press the Green Button.
4. A popup will appear , here you can set several parameters of your event recording
Start and End time, record mode (once, daily, weekly or off), the channel, standby (you can set a
state that your box turn to after recording), Filename and target device.
5. Store your settings by using the OK button.
Chapter 2 >> PVR Functions
English
PVR Functions