Technical Specs

8 / 18
set an alert tone, an alert tone will be given off when the battery level is too low.
 A charging animation appears when the battery is being charged. When the charging is
complete, the animation disappears.
Using a travel adapter:
 Install the battery into the mobile phone before charging the battery.
 Connect the adapter of the travel charger with the charging slot in the mobile phone. Ensure
that the adapter is fully inserted.
 Insert the plug of the travel charger to an appropriate power outlet.
 During the charging, the battery level grids in the battery icon keep flickering till the battery
is fully charged.
 It is normal whenthe battery is become hot during the charging period.
 The battery icon does no longer flicker when the charging process ends.
Note:
Ensure that the plug of the charger, the plug of the earphone, and the plug of the USB cable are
inserted in the right direction. Inserting them in a wrong direction may cause charging failure or
other problems.
Before the charging, ensure that the standard voltage and frequency of the local mains supply match
the rated voltage and power of the travel charger.
Using the Battery
The performance of a battery is subject to multiple factors: radio network configuration, signal
strength, ambient temperature, chosen functions or settings, phone fittings, and the voice, data or
other application mode you choose to use.
To guarantee the optimal performance of your battery, please stick to the following rules:
 Use only the battery provided by the vendor. Otherwise, damages or even injuries could be
caused during the charging.
 Power off the mobile phone before removing the battery.
 The charging process lasts a longer time for a new battery or a battery not in use for long. If
the battery voltage is too low to enable the mobile phone to be powered on, charge the battery
for a longer time. In this case, the battery icon does not flicker until a long time after the
battery enters the charge status.
 During the charging, ensure the battery is placed in a room temperature environment or in an
environment close to room temperature.
 Immediately stop using the battery if the battery produces odor, overheats, cracks, distorts or
has other damage, or if the electrolyte leaks.
 The battery wears out with use. A longer charging time is required as the battery is put into
use for a long time. If the total conversation duration decreases but the charging time
increases even though the battery is properly charged, purchase a standard battery from the
OEM or use a battery approved by our company. Using any poor-quality fittings will cause
harm to your mobile phone or even incur danger!
Note: To guarantee your personal safety and protect the environment, do not litter the battery!
Return the old battery to the mobile phone manufacturer or place it in specified battery reclamation
areas. Do not litter any battery with other rubbish.
Warning: Short-circuits of the battery may cause explosion, fire, personal injury or other
severe consequences!