Technical Specs

9 / 18
3.4 Powering On/Off the Mobile Phone
Hold the End key for a while to power on the mobile phone. A power-on animation appears on the
display screen.
Input the phone lock code and press the OK key if the mobile phone prompts you to input the phone
lock code. The original code is 1234.
Input the PIN and press the OK key if the mobile phone prompts you to input the PIN. The PIN is
provided by the network operator for new opening SIM card.
Enter the standby interface.
To power off the mobile phone, hold the End key for a while.
3.5 Linking to the Network
After the SIM card and the mobile phone are successfully unlocked, the mobile phone automatically
searches for an available network. After finding a network, the mobile phone enters the standby
state. When the mobile phone is registered in the network, the name of the network operator is
displayed on the screen. Then you can dial or receive a call.
3.6 Dialing Calls
In the standby interface, press number keys to input the area code and the telephone number,
and then press the Dial key to dial a call. To end the call, press the End key.
 Dialing an international call
Press quickly * key and input "+". Then input the country code, the area code and the
telephone number. Finally, press the Dial key.
 Dialing a call to a number in the phonebook
Enter the phonebook and use the upor downdirection keys to find the telephone number you
want to call.
Press the Dial key. The mobile phone automatically dials the chosen telephone number.
 Redialing the last number
In the standby interface, press the dial key to show the dialed calls.
Press the upor down direction keys to select a number you want to dial and then press the Dial
key.
 Answering incoming calls
Press the Dial key or the Left soft key to answer an incoming call.
Press the End key to end the current conversation.
To reject an incoming call, press the End key or the Right soft key.
Note: If the caller can be identified, the mobile phone will present the calling number. If the calling
number exists in the phonebook, the mobile phone will present both the name and the phone number
of the caller. If the caller cannot be identified, the mobile phone will present the calling number only.
You can answer an incoming call when using a function list or browsing the phonebook.
 Using options during a conversation
Select Options during a conversation to pause, end the ongoing call, originate a new call,
browse the phonebook, view information, set the mute, or perform other operations. For details,
refer to the menu guide.
3.7 Using the Headset
It would enter headset mode automatically when you insert headset to the slot. Make sure of